Remote for HeadRush

Rigs

Go to rig

Scenes

Blocks

Footswitches

Press and hold works like holding the real switch. Rename switches in Settings to match your board.

Footswitch mode

Board screens

Connect

Demo board

Try every control against a simulated board. Nothing is sent to hardware.

Bluetooth MIDI adapter

Connects to a Bluetooth MIDI adapter plugged into the board’s MIDI In and Out, like a CME WIDI Jack.

Computer MIDI port

Uses a MIDI port your computer already sees, including a Bluetooth adapter paired in Audio MIDI Setup on a Mac.

MIDI channel

Match the channel set on the board, or set the board to Omni.

Set up the board once

Plug the adapter into the board’s MIDI In and MIDI Out. The Flex Prime uses 1/8" TRS Type A jacks.
On the board, open Global Settings → MIDI and set MIDI Channel to match the channel above.
Turn Prog Change Recv on so “Go to rig” works. Turn Send on to see rig changes here.
In Hardware Assign, give each rig a MIDI PROG number from 1 to 128.

MIDI monitor

Settings

Theme

Vibrate on pressAndroid phones only

Keep screen awakeHandy on a music stand during a gig

Block names and colors

Scene names

Footswitch names

Names and colors

Phase 1 prototype: Bluetooth MIDI and the demo board. Wi-Fi rig editing and AI-built rigs come in later phases. Names and colors are saved on this device only.